Horizontal ANSI Pump-manufacture,factory,supplier from China

1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.

Mark III is diagnosed global as the surest name in ANSI chemical process pumps.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps include many proven reliability- and overall performance-enhancing features. They're to be had in a huge range of configurations, which include mechanically sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller. It presents flexibility and breadth of pumping solutions in limitless applications.GENERAL DESCRIPTION OF PUMPThe Mark III chemical process pump is a horizontal, end suction, single stage, centerline discharge, centrifugal pump.

The Mark III chemical process pump is a horizontal, cease suction, unmarried degree, centerline discharge, centrifugal pump.

The 3196 ansi series is to be had in a huge range of sizes and capacities to match clearly any method-fluid software.Utility: Chemical processingGeneral industriesMiningWater sourcesEnergy technologyPrimary metalsPulp and paperOil and gasolineCapacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)Available Size:6''-15''Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuA

The Mark III chemical process pump is a horizontal, end suction, single level, centerline discharge, centrifugal pump.

SUMMARY AND DESCRIPTIONProduct SummaryType: Single stage, horizontal, overhung, end suction, centerline discharge, back pull-out, fully compliant with ASME B73.1-2001Lead design center: Dayton GTCLead manufacturing center: ChesapeakeSecondary manufacturing center: NewarkGeneral DescriptionThe Mark 3 is recognized worldwide as the premier name in ANSI chemical process pumps. The advanced design and precision manufacture results in a rugged, heavy-duty pump that will provide reliable, dependable performance in the most demanding services. Below are some of the highlights of the Mark 3 pumps.

Every day in over 500,000 installations, 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

TYPICAL SPECIFICATIONSDesign: Shall be of a horizontal, end suction, single stage, centerline discharge, “back pull-out” construction, meeting the design criteria of the ASME B73.1-2001 standard.General: All wetted parts shall be permanently marked with the material of construction. Cast parts shall have a conditional lifetime casting guarantee. Stainless steel parts shall be cast to the ASME A744 standard.Casing: Shall have a fully machined wet face and shall be capable of being foot or centerline mounted.

The mark III chemical technique pump is a horizontal, give up suction, unmarried level, centerline discharge, centrifugal pump.

The 3196 ANSI collection is to be had in a wide variety of sizes, capacities and substances to match absolutely any technique-fluid application.RECEIVING THE PUMPInspect the pump as soon as it is received. Carefully check that everything is in good order. Make notes of damaged or missing items on the receipt and freight bill. File any claims with the transportation company as soon as possible.STORAGE REQUIREMENTSShort Term: (Less than 6 months) normal packaging procedure is designed to protect the pump during shipping.

Mark III is recognized international as the most suitable name in ANSI chemical method pumps.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller.

Mark III is identified worldwide because the most advantageous name in ansi chemical procedure pumps.

Conforming to ASME(ANSI) B73.1, the Mark 3 chemical process pump provides outstanding hydraulic performanceand many proven reliability- and performance-enhancing features. And it is recognized international as the most suitable name in ANSI chemical method pumps.1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)3.Available Size:6''-16''

Absolutely open impeller is the first-class layout for the chemical process industries services. Ideally fitted for corrosives and abrasives, handles solids and stringy fibers simply. Lets in for easy healing of clearances while wear takes place. Lower back pump-out vanes reduce stress at the shaft seal, reduce axial thrust at the bearings.Our seal chambers permit seals to run cooler with better face lubrication. Keep solids, air and vapors faraway from the seal faces for prolonged seal lifestyles.Our electricity ends design maximizes reliability and mean time among failure (mtbf).

Our seal chambers permit seals to run cooler with higher face lubrication.

Proven PerformanceEvery day in over 500,000 installations, the 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Fully open impeller is the excellent design for the chemical manner industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers conveniently. Permits for simple recuperation of clearances while wear takes area.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing functions. They're available in a wide range of configurations, which includes routinely sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller.

Chemical Process PumpsDesigned for Total Range ofIndustry ServicesI Capacities to 7000 GPM (1364 m 3 /h)I Heads to 730 feet (223 m)I Temperatures to 700°F (371° C)I Pressures to 375 PSIG (2586 kPa)Product Description:The 3196 ANSI series is to be had in a huge variety of sizes, capacities and materials to match virtually any system-fluid utility.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability.CASING• Top centerline discharge for air handling, self-venting.• Class 150 pumps have Class 300 wall thickness as standard.• Back pull-out desi

Safety•  ANSI B15.1 coupling protect•  Ductile iron body adapterFirst rate capabilities for top notch performanceProlonged pump existenceEase of protection•  Lower back pull-out layout•  External impeller adjustment•  Most interchangeabilityMost fulfilling hydraulic performance•  Absolutely open impeller•  Complete 50/60 hz coverage•  29 sizes•  automatic pump choiceThe 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20Nickel

The 3196 ANSI Series is available in a extensive variety of sizes, capacities and materials to match sincerely any manner-fluid software.1.Application:  Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas 2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)  3.Available Size:6’’-15’’ 4.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability. CASING• Top centerline discharge for air

Proven PerformanceOver One Million Process Pump Installations WorldwideWhen the 3196 ANSI Standard Dimension Process Pump was first introduced in 1961, it immediately became the standard for the industry. Today, the number of installations attest to its remarkable performance.