1.Our pumps could be 100% interchangeble with leading enterprise's Mark III series.
2.The wet ends material like Titanium, Nickel, Hastelloy C, A20, CD4M, 316SS, Cast Steel etc are all available.
Conforming to ASME (ANSI) B73.1, Mark 3 pumps include many proven reliability- and overall performance-enhancing features. They're to be had in a huge range of configurations, which include mechanically sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller. It presents flexibility and breadth of pumping solutions in limitless applications.
GENERAL DESCRIPTION OF PUMP
The Mark III chemical process pump is a horizontal, end suction, single stage, centerline discharge, centrifugal pump. It is an “ANSI” standard pump, which means it conforms to the ASME B73.1M ANSI standard.
PROTECTION OF OPENINGS AND THREADS
When the pump is shipped all threads and all openings are covered. This protection/covering should not be removed until installation. If, for any reason, the pump is removed from service, this protection should be reinstalled.
Submitted successfully
We will contact you as soon as possible