ANSI Chemical Process Pump

Fully open impeller is the excellent design for the chemical manner industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers conveniently. Permits for simple recuperation of clearances while wear takes area. Again pump-out vanes lessen stress at the shaft seal, lessen axial thrust on the bearings.

1.Application:

Chemical Processing

General Industries

Mining

Water Resources

Power Generation

Primary Metals

Pulp and Paper

Oil and Gas

2.Capacities to 7000 GPM (1590 m³ /h)

Heads to 730 feet (223 m)

Temperatures to 700° F (371° C)

Pressures to 375 PSIG (26 bar)

3.Available Size:6’’-15’’

4.Impeller

Designed for long-term, maintainable performance and minimum hydraulic loads for

maximum reliability.

CASING

• Top centerline discharge for air handling, self-venting.

• Class 150 pumps have Class 300 wall thickness as standard.

• Back pull-out design.

• Integral feet.

Seal Chamber

Designed for favorable seal environment —proper heat dissipation and lubrication of seal faces.

The design must also be able to handle tough services: liquids containing solids, air or vapors.

Power End

Designed for optimum bearing life, effective oil cooling, and minimum shaft deflection. Onboard

condition monitoring provides early warning of potential failures, before they occur.

5.

6.Outstanding Features for Outstanding Performance

Extended Pump Life

Ease of Maintenance

•  Back Pull-out Design

•  External Impeller Adjustment

•  Maximum Interchangeability

Optimum Hydraulic Performance

•  Fully Open Impeller

•  Full 50/60 Hz Coverage

•  29 Sizes

•  Computerized Pump Selection

Safety

•  ANSI B15.1 Coupling Guard

•  Ductile Iron Frame Adapter