Sulzer Pump Standards Pdf-manufacture,factory,supplier from China

In the field of petroleum and chemical industry, the most widely used international standards for centrifugal pumps are API610, ISO5199 and ANSIB73.1M/B73.2M, while the domestic standards are GB3215 and GB5656/T. These standards are described below.1.1 API is the abbreviation of the American Petroleum Institute. The purpose of API610 standard is to provide a procurement specification for the manufacture and procurement of centrifugal pumps.API610 (seventh edition) is proposed for centrifugal pumps used in oil refineries, and its standard name is Central Pumps for General Refinery Services.

ANSI Mark III 4x3-10H bare shaft pump in WCB material, other materials like CD4M, CF8M, A20 etc are all available. And our pumps are 100% interchangeble with leading enterprise's one.If any needs, pls contact me for quotation.

Market Overview: ANSI pumps are centrifugal process pumps that meet the standards of the American National Standards Institute (ANSI). It is the specification for centrifugal pumps for chemical process applications, and covers metallic centrifugal pump designs. The ASME B73 standard states the dimensional interchangeability requirements, configuration and design features to pump manufacturers in order to facilitate the installation, as well as to enhance reliability and safety of the pump unit. Global ANSI Pumps key players include KSB, Flowserve, Ruhrpumpen Group, etc.

We can make pump parts as per your drawings or samples, if any needs, I'd like to offer you for your reference.

We can supply all necessory accessories to assemble a pump, like mechanical seal, labyrinth seal, bearing etc, pls contact me for quotation if any needs.

Main applicationsBoiler feedHigh-pressure unit charge in refiningEthylene shippingOnshore and offshore waterfloodOffshore crude shippingOur pump is 100% interchangeble with original one, if any needs, pls contact me for quotation.

We are at Pump&Fluid Euipment Exhibition

The hydraulic design of two-phase flow pulp pump adopts the principle of “Relative suction and relative blocking”in the theory of two-phase flow, so that the hydraulic performance of the flow parts of the pump conforms to the law of solid-liquid two-phase flow, thus reducing the slurry flow parts of the erosion and wear, greatly improving the efficiency and service life of the pump, the pump series has the following notable features:1.High efficiency and energy saving: The running efficiency is 3-10 percentage points higher than the average of the ordinary pulp pump, the energy saving and cons

China General Machinery Industry Association Pump Branch held the China pump industry management working conference in Zibo, Shandong Province.

First. Classification by impeller number 1. Single-stage pump: that is, there is only one impeller on the pump shaft. 2. Multi-stage pump: that is, there are two or more impellers on the pump shaft, and the total lift of the pump is the sum of the lifts generated by n impellers. Second, classified according to work pressure 1. Low-pressure pump: the pressure is less than 100m H2O; 2. Medium pressure pump: the pressure is between 100 and 650 meters of water column; 3.

Typical Applications• Acid transfer• Brine• Chemical processing• Petrochemical processing• Corrosive services• Food and beverage processing• Hydrocarbon processing• Pharmaceuticals• Polymers• Pulp and paper• Seawater• Slurries• Solvents• Steel and primary metals• Water and wastewater treatment

This kind of pump is used for all normal pumping applications, with stocks up to 8%, e.g., liquors, water, chemicals, white water, condensate, etc.Capacities 11,000 m³/h / 48,400 USgpmHeads 160 m / 525 ftPressures 16 / 25 bar, 230 / 360 psi,depending on material and sizeTemperatures 180 °C / 356 °FPls let me know if you have any needs.