русский
español
عربى
português
E-mail
maryduan@sdprecisionpumps.com
NPP Series Dewatering Pump-manufacture,factory,supplier from China
(Total 24 Products for NPP Series Dewatering Pump)
Non-clogging design passes big particles and long fibers, e.g. plastic stripes. Specially designed vane edges stay clean. Front vanes with sideplate cutting grooves keep gap clean. Back vanes prohibit particles from entering the seal cavity and balance axial forces. Liquids: sludges, waste waters, effluents.A double volute casing in larger pumps reduces radial forces and shaft deflection.
Contact Now
Npp/npt hydraulic layout non-clogging design passes massive particles and long fibers, e.g.
Contact Now
1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.
Contact Now
The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.
Contact Now
Operating data:Capacities 2,000 m 3 /h / 8,800 USgpmHeads 90 m / 295 ftTemperatures 180°C / 356°FFrequencies 50 or 60 HzPressures 16 bar / 230 psi depending on material and sizeService Solutions To maintain and improve the high performance of AHLSTAR™ process pumps, customers can select from a wide range of available service solutions.
Contact Now
High pumping performance comes as a stop end result of the supply, reliability and nice of the right pump. Right spare parts and proper safety Make certain the excessive typical performance of pumps in complicated production operations.We aid our clients with an huge form of pumping offerings, from spare elements to far flung monitoring.
Contact Now
The concept for sealing water equipment meets all the requirements demanded by the pumped liquid or the shaft seal. All general pumping solutions can be covered by just four different options. Special materials to take into account corrosive environments ensure reliable operation in extreme circumstances.1. Our wear pump used for corrosion and abrasion pumping occasion. Also well used for anti-blocking occasion.2.
Contact Now
Chemical Process PumpsDesigned for Total Range ofIndustry ServicesI Capacities to 7000 GPM (1364 m 3 /h)I Heads to 730 feet (223 m)I Temperatures to 700°F (371° C)I Pressures to 375 PSIG (2586 kPa)Product Description:The 3196 ANSI series is to be had in a huge variety of sizes, capacities and materials to match virtually any system-fluid utility.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability.CASING• Top centerline discharge for air handling, self-venting.• Class 150 pumps have Class 300 wall thickness as standard.• Back pull-out desi
Contact Now
Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed to surpass market standards andensure excellent performance and reliability1.Our non-blocking pump used for blocking or abrasion occasion that ordinary slurry pump not available.2.Performance(Max parameter)Heads 90mCapacity 550l/s Temperature 180℃
Contact Now
The Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiencyThe Process Pump is designed for continuous operation in industrial processes• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• Others
Contact Now
The 3196 ansi series is to be had in a huge range of sizes and capacities to match clearly any method-fluid software.Utility: Chemical processingGeneral industriesMiningWater sourcesEnergy technologyPrimary metalsPulp and paperOil and gasolineCapacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)Available Size:6''-15''Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuA
Contact Now
The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.
Contact Now
Non-clogging method pumps are the right answers whilst the liquid contains huge or long particles.NPP/NPT Hydraulic Design Non-clogging design passes big particles and long fibers, e.g.
Contact Now
1.Our non-blocking pump used for blocking or abrasion event that regular slurry pump now not available.2.Performance(max parameter)Heads 90mAbility 550l/s Temperature one hundred eighty℃
Contact Now
Safety• ANSI B15.1 coupling protect• Ductile iron body adapterFirst rate capabilities for top notch performanceProlonged pump existenceEase of protection• Lower back pull-out layout• External impeller adjustment• Most interchangeabilityMost fulfilling hydraulic performance• Absolutely open impeller• Complete 50/60 hz coverage• 29 sizes• automatic pump choiceThe 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20Nickel
Contact Now
The 3196 ANSI Series is recognized international as the most suitable name in ANSI chemical method pumps. And it is available in a extensive variety of sizes, capacities and materials to meet any application requirements.1.Application:Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar) 3.Available Size:6''-15''
Contact Now
The 3196 ANSI Series is available in a extensive variety of sizes, capacities and materials to match sincerely any manner-fluid software.1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas 2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar) 3.Available Size:6’’-15’’ 4.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability. CASING• Top centerline discharge for air
Contact Now
The 3196 ANSI Series is available in a extensive variety of sizes, capacities and materials to match sincerely any manner-fluid software. Capacities to 7000 GPM (1590 m³ /h) Heads to 730 feet (223 m) Temperatures to 700° F (371° C) Pressures to 375 PSIG (26 bar)1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Available Size:6’’-15’’3.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHa
Contact Now
1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600
Contact Now
Fast and accurate impeller setting with the industry's most innovative external impeller adjustment mechanism.In-shop reverse vane impeller adjustment with the only pump that takes full advantage of the back pull-out design.BEARING INSTALLATION FOR POWER END ASSEMBLY (CONT'D)Both bearings have a slight interference fit which requires that they be pressed on the shaft with an arbor or hydraulic press. A chart giving bearing fits is shown in Figure 35. Even force should be applied to the inner race only. Never press on the outer race, as the force will damage the balls and races.
Contact Now
Applications:The Process Pump is designed for continuous operation in industrial processes.• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• OthersThe Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiency
Contact Now
The LF3196 process pump line is specifically designed to provide superior performance for low flow services of the Chemical Process Industries.1. Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 220 GPM (50 m3/h)N Heads to 925 feet (282 m)N Temperatures to 700° F (371° C)N Pressures to 450 PSIG (3102 kPa) 3. Available Size:8’’-13’’ 4.Radial vane impeller5.CASING#150RF/#300RF flange6.Seal ChamberStandard bore and big bore
Contact Now
1.High pumping performance comes as a result of the availability, reliability and quality of the correct pump. Genuine spare parts and proper maintenanceensure the high performance of our process pumps in complex production operations.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%. 2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600
Contact Now
Relate News
We also has its derivative series for low flow hydraulics for improved hydraulic fit-even at low flow conditions, designed for using in heavy duty refinery services, petrochemical plants, and offshore services. It is designed according to ISO API610 and API682.Pressure 50 bar/725 psiTemperature 425℃/800℉Pls contact me at any time for quotation.
We could handle many series of leading enterprise S, if any needs, pls contact me for quotation.
The hydraulic design of two-phase flow pulp pump adopts the principle of “Relative suction and relative blocking”in the theory of two-phase flow, so that the hydraulic performance of the flow parts of the pump conforms to the law of solid-liquid two-phase flow, thus reducing the slurry flow parts of the erosion and wear, greatly improving the efficiency and service life of the pump, the pump series has the following notable features:1.High efficiency and energy saving: The running efficiency is 3-10 percentage points higher than the average of the ordinary pulp pump, the energy saving and cons
This series is designed for heavy duty refinery services, petrochemical plants and offshore services. It's designed according to API 610 and API 682.Pressure 50 bar/725 psiTemperature 425℃/800FPls contact me for quotation if any needs.
This series is designed for the most abrasive and erosive pumping applications, such as lime milk and mud, andcoating pigments. Specially designed wear-resistant pumping hydraulics (W) with wear-resistant materials deliver six to eight timeslonger life time than conventional pumps.Capacities 7,000 m³/h / 30,800 USgpmHeads 110 m / 360 ftPressures 16 / 25 bar, 230 / 360 psi,depending on material and sizeTemperatures 180 °C / 356 °F Pls let me know if you have any needs.
Pumps of the series SM are volute casing pumps with double suction impeller for application as raw or clean water pumps in municipal or industrial water supply systems, as cooling water-ballast-and pipeline pumps for the correspondentbranches of industry. These pumps operate in capacity ranges up to 10500 m3/h and heads up to 280m. the temperature range is –20 to +130 ℃Pls contact me if any needs.
ANSI Mark III 4x3-10H bare shaft pump in WCB material, other materials like CD4M, CF8M, A20 etc are all available. And our pumps are 100% interchangeble with leading enterprise's one.If any needs, pls contact me for quotation.
Our low flow series is 100% interchangeble with original LF3196 one, if any needs, pls contact me for quotation.
4 ANSI pumps in stainless steel material are ready for ship to Latin America, hope to receive good feedback from customer soon.Our pumps could be 100% interchangeble with leading enterprise's APP, 3196, Mark III etc series, if any needs, pls feel free to contact me for quotation.
Reason Analysis: Any Centrifugal pump has an optimal working range, reflected in the performance curve of the pump. The vibration of the Centrifugal pump varies with the flow rate, and usually its value is minimum near the optimal efficiency point, and increases with the increase or decrease of the flow rate. The variation of vibration with flow rate depends on the energy density, specific speed and cavitation specific speed of the pump. In general, the variation of vibration increases with the increase of energy density, specific speed and cavitation specific speed.
This diffuser style barrel pump can be used in the following industry:Oil and gasHydrocarbon processingPower generation Pulp, paper and boardGeneral industryChemical provess industryWater and wasterwaterIf any needs, pls feel free to let me know
We are at Pump&Fluid Euipment Exhibition
Submitted successfully
We will contact you as soon as possible
Close