ANSI 3196s Process Centrifugal Water Pump-manufacture,factory,supplier from China

1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.

Absolutely open impeller is the first-class layout for the chemical process industries services. Ideally fitted for corrosives and abrasives, handles solids and stringy fibers simply. Lets in for easy healing of clearances while wear takes place. Lower back pump-out vanes reduce stress at the shaft seal, reduce axial thrust at the bearings.Our seal chambers permit seals to run cooler with better face lubrication. Keep solids, air and vapors faraway from the seal faces for prolonged seal lifestyles.Our electricity ends design maximizes reliability and mean time among failure (mtbf).

Mark III is diagnosed global as the surest name in ANSI chemical process pumps.

All chrome steel systems for tremendously corrosive conditions.

Operating data:Capacities 6,100 m 3 /h / 26,860 USgpmHeads 160 m / 525 ftTemperatures 210°C / 410°FFrequencies 50 or 60 HzPressures 25 bar / 360 psiThe product line offers a large form of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilities. stocks are pumped like water.

High performance process pumps for demanding applicationsAPP/T end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.Main benefits：Long and trusted experience in all industrial segmentsExcellent performanceExceeds standard requirements of international ISO 5199 and ISO 2858 standardsSuitable for the most demanding industrial applicationsUnique, patented and superior design features minimize life cycle costsQuick and easy installation, safe operation, easy maintenance and serviceMa

Excessive overall performance method pumps for stressful packagesApp/t quit-suction unmarried-stage centrifugal procedure pumps are used for annoying business programs to make certain system reliability, excessive performance and occasional operating charges.Important blessings：Long and trusted enjoy in all business segmentsAwesome performanceExceeds general requirements of global iso 5199 and iso 2858 standardsSuitable for the most demanding business programsSpecific, patented and superior layout features minimize life cycle feesShort and smooth installation, secure operation, clean protectio

Mechanical sealsDifferent mechanical seals available.

Our seal chambers permit seals to run cooler with higher face lubrication.

The Mark III chemical process pump is a horizontal, cease suction, unmarried degree, centerline discharge, centrifugal pump.

Applications:The Process Pump is designed for continuous operation in industrial processes.• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• OthersThe Process Pumps are meant for pumping all kinds of  liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiency

The Mark III chemical process pump is a horizontal, end suction, single level, centerline discharge, centrifugal pump.

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

The LF3196 process pump line is specifically designed to provide superior performance for low flow services of the Chemical Process Industries.1. Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 220 GPM (50 m3/h)N Heads to 925 feet (282 m)N Temperatures to 700° F (371° C)N Pressures to 450 PSIG (3102 kPa) 3. Available Size:8’’-13’’ 4.Radial vane impeller5.CASING#150RF/#300RF flange6.Seal ChamberStandard bore and big bore 

Safety•  ANSI B15.1 coupling protect•  Ductile iron body adapterFirst rate capabilities for top notch performanceProlonged pump existenceEase of protection•  Lower back pull-out layout•  External impeller adjustment•  Most interchangeabilityMost fulfilling hydraulic performance•  Absolutely open impeller•  Complete 50/60 hz coverage•  29 sizes•  automatic pump choiceThe 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20Nickel

Conforming to ASME (ANSI) B73.1, Mark 3 pumps include many proven reliability- and overall performance-enhancing features. They're to be had in a huge range of configurations, which include mechanically sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller. It presents flexibility and breadth of pumping solutions in limitless applications.GENERAL DESCRIPTION OF PUMPThe Mark III chemical process pump is a horizontal, end suction, single stage, centerline discharge, centrifugal pump.

We provide innovative pumping solutions to business partners in the following industries:• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• General Industry• Chemical Process Industry• Water and WastewaterA Reputation for Excellenc

The Mark 3 chemical process pump offers first-rate hydraulic performance, unmatched reliability and occasional total fee of ownership.Conforming to ASME(ANSI) B73.1,the Mark 3 includes many confirmed reliability- and overall performance-improving functions.1.Application:  • Acid transfer• Brine• Chemical processing• Petrochemical processing• Corrosive services• Food and beverage processing• Hydrocarbon processing• Pharmaceuticals Polymers• Pulp and paper• Seawater• Slurries• Solvents• Steel and primary metals• Water and wastewater treatment 2.Operating Parameters• Flows to

3196 takes fully open impeller which is the best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease.

The Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiencyThe  Process Pump is designed for continuous operation in industrial processes• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• Others

Every day in over 500,000 installations, 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Ahlstar app/t stop-suction unmarried-stage centrifugal process pumps are used for annoying business programs to make sure process reliability, excessive efficiency and occasional running costs.Excessive overall performance manner pumps for stressful packagesVersatile Solutions for Degassing ApplicationsPositive Inlet HeadWhen pumping gas containing liquids in unstable inlet head applications, the AHLSTAR pump with LM integrated liquid ring pump degassing unit secures reliable pumping.• Single mechanical seal with recirculation flushing for clean liquids.• Single mechanical seal with extern

Fully open impeller is the excellent design for the chemical manner industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers conveniently. Permits for simple recuperation of clearances while wear takes area.

1.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%.2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600