WPP to Engining Water Pump-manufacture,factory,supplier from China

All chrome steel systems for tremendously corrosive conditions.

All pumps in have been standardized, using common modules and components, for maximum interchangeability and easy installation and maintenanceA double volute casing in larger  pumps reduces radial forces and shaft deflection.The self-venting, top centerline casing prevents air lock in the top of the casing. The sideplate is adjusted externally to maintain a constant impeller clearance and continuous high efficiency.Impeller mounting provides strong, reliable power transmission. It is self-locking and reverse rotation safe. Facilitates the installation and removal of the impeller.

Absolutely open impeller is the first-class layout for the chemical process industries services. Ideally fitted for corrosives and abrasives, handles solids and stringy fibers simply. Lets in for easy healing of clearances while wear takes place. Lower back pump-out vanes reduce stress at the shaft seal, reduce axial thrust at the bearings.Our seal chambers permit seals to run cooler with better face lubrication. Keep solids, air and vapors faraway from the seal faces for prolonged seal lifestyles.Our electricity ends design maximizes reliability and mean time among failure (mtbf).

The concept for sealing water equipment meets all the requirements demanded by the pumped liquid or the shaft seal. All general pumping solutions can be covered by just four different options. Special materials to take into account corrosive environments ensure reliable operation in extreme circumstances.1. Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.

Operating data:Capacities 7,000 m 3 /h / 31,000 USgpmHeads 110 m / 360 ft   Temperatures 180°C / 356°FFrequencies 50 or 60 HzPressures 16 bar / 230 psi depending on material and sizeTo ensure maximum reliability in opposition to corrosion we provide material choice alternatives from our very own metallic foundries.All parts in contact with the pumped liquid can be constructed from the equal creation material because the pump casing.

Operating data:Capacities 6,100 m 3 /h / 26,860 USgpmHeads 160 m / 525 ftTemperatures 210°C / 410°FFrequencies 50 or 60 HzPressures 25 bar / 360 psiThe product line offers a large form of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilities. stocks are pumped like water.

All stainless-steel structures for extraordinarily corrosive situations. all parts inclusive of the adapter and bearing unit are manufactured from chrome steel.Moreover, stainless steel may be selected for the bearing unit auxiliary device to offer longer working lifestyles in corrosive surroundings.1.Our wear pump used for corrosion and  abrasion pumping occasion.

We provide innovative pumping solutions to business partners in the following industries:• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• General Industry• Chemical Process Industry• Water and WastewaterA Reputation for Excellenc

We ought to replica parts as per your diverse types of samples and desires.Sample:Finish:

High pumping performance comes as a stop end result of the supply, reliability and nice of the right pump. Right spare parts and proper safety Make certain the excessive typical performance of  pumps in complicated production operations.We aid our clients with an huge form of pumping offerings, from spare elements to far flung monitoring.

We help our customers with an  big range of pumping offerings,  from spare components to faraway monitoring. additionally we offer various types  of service agreements wherein spare  components and carrier answers can be  mixed.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

The Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiencyThe  Process Pump is designed for continuous operation in industrial processes• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• Others

We support our customers with an  extensive range of pumping services,  from spare parts to remote monitoring. Additionally we offer various types  of service agreements in which spare  parts and service solutions can be  combined.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

Applications:The Process Pump is designed for continuous operation in industrial processes.• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• OthersThe Process Pumps are meant for pumping all kinds of  liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiency

1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110m Capacity 2000l/s     Temperature 180℃

1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.

The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep  the area between the impeller and the  casing cover clean, and reduce the  axial load on the bearings.

1.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%.2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)3.Available Size:6’’-16’’4.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuAlloy 20NickelHastelloy CTitaniumFrameDuctile IronBearing HousingDuctile IronAdaptorDuctile IronShaft316SS/4140Sleeve316SSCD4M

1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

The Mark 3 chemical process pump offers first-rate hydraulic performance, unmatched reliability and occasional total fee of ownership.Conforming to ASME(ANSI) B73.1,the Mark 3 includes many confirmed reliability- and overall performance-improving functions.1.Application:  • Acid transfer• Brine• Chemical processing• Petrochemical processing• Corrosive services• Food and beverage processing• Hydrocarbon processing• Pharmaceuticals Polymers• Pulp and paper• Seawater• Slurries• Solvents• Steel and primary metals• Water and wastewater treatment 2.Operating Parameters• Flows to

1.High pumping performance comes as a result of the availability, reliability and quality of the correct pump. Genuine spare parts and proper maintenanceensure the high performance of our process pumps in complex production operations.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%. 2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600