NPP Spare Part-manufacture,factory,supplier from China

Npp/npt hydraulic layout non-clogging design passes massive particles and long fibers, e.g.

1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)3.Available Size:6’’-16’’4.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuAlloy 20NickelHastelloy CTitaniumFrameDuctile IronBearing HousingDuctile IronAdaptorDuctile IronShaft316SS/4140Sleeve316SSCD4M

Non-clogging design passes big  particles and long fibers, e.g.  plastic stripes. Specially designed vane edges  stay clean. Front vanes with sideplate cutting grooves keep  gap clean. Back vanes prohibit  particles from entering  the seal cavity and balance  axial forces. Liquids: sludges, waste waters, effluents.A double volute casing in larger pumps reduces radial forces and shaft deflection.

High pumping performance comes as a stop end result of the supply, reliability and nice of the right pump. Right spare parts and proper safety Make certain the excessive typical performance of  pumps in complicated production operations.We aid our clients with an huge form of pumping offerings, from spare elements to far flung monitoring.

Operating data:Capacities 2,000 m 3 /h / 8,800 USgpmHeads 90 m / 295 ftTemperatures 180°C / 356°FFrequencies 50 or 60 HzPressures 16 bar / 230 psi depending on material and sizeService Solutions To maintain and improve the high  performance of AHLSTAR™ process  pumps, customers can select from a  wide range of available service solutions.

We support our customers with an  extensive range of pumping services,  from spare parts to remote monitoring. Additionally we offer various types  of service agreements in which spare  parts and service solutions can be  combined.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

The 3196 ansi series is to be had in a huge range of sizes and capacities to match clearly any method-fluid software.Utility: Chemical processingGeneral industriesMiningWater sourcesEnergy technologyPrimary metalsPulp and paperOil and gasolineCapacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)Available Size:6''-15''Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuA

We help our customers with an  big range of pumping offerings,  from spare components to faraway monitoring. additionally we offer various types  of service agreements wherein spare  components and carrier answers can be  mixed.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

Non-clogging method pumps are the right answers whilst the liquid contains huge or long particles.NPP/NPT Hydraulic Design Non-clogging design passes big particles and long fibers, e.g.

Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed to surpass market standards andensure excellent performance and reliability1.Our non-blocking pump used for blocking or abrasion occasion that ordinary slurry  pump not available.2.Performance(Max parameter)Heads 90mCapacity 550l/s  Temperature 180℃

The Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiencyThe  Process Pump is designed for continuous operation in industrial processes• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• Others

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

1.High pumping performance comes as a result of the availability, reliability and quality of the correct pump. Genuine spare parts and proper maintenanceensure the high performance of our process pumps in complex production operations.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%. 2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

1.Our non-blocking pump used for blocking or abrasion event that regular slurry  pump now not available.2.Performance(max parameter)Heads 90mAbility 550l/s  Temperature one hundred eighty℃

The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep  the area between the impeller and the  casing cover clean, and reduce the  axial load on the bearings.

Our Pump substitute components are reliable, cost effective replacement elements which might be interchangeable with durco etc widely known pump manufacturers.We manufacture more than a few substitute parts including shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and plenty of more.MAINTENANCEPREVENTIVE MAINTENANCEA procedure for keeping accurate maintenance records is a critical part of any program to improve pump reliability. There are many variables that can contribute to pump failures.

The 3196 ANSI Series is available in a extensive variety of sizes, capacities and materials to match sincerely any manner-fluid software. Capacities to 7000 GPM (1590 m³ /h) Heads to 730 feet (223 m) Temperatures to 700° F (371° C) Pressures to 375 PSIG (26 bar)1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Available Size:6’’-15’’3.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHa

We provide innovative pumping solutions to business partners in the following industries:• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• General Industry• Chemical Process Industry• Watera.Closed Impelleris used for pumping clean liquids or liquids containing some impurities.For pump types:APPEPPb.Open Impelleris designed for liquids containing solid particles, abrasive liquids or stock up to 8 % consistency.For pump types:APPARPASPEPPc.Special Open Impelleris suitable for liquids containing larger solid particles and long fibers, abrasive liquids or stock up to 8 % co

1.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%.2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

1.Our slurry tank flushing pump specially design for current high-speed paper machine, board machine and also very applicable for other huge capacity pumping occasion.2.Performance(Max parameter)Heads 130mCapacity 6500l/s  Temperature 120℃

Mechanical sealsDifferent mechanical seals available.

ADVANTAGE:1.Increased reliability and mechanical seal life due to the ideal seal environment created by the SealSentry seal chamber.2.Ease of maintenance resulting from optimal, predictable seal chamber pressures that are re-established after every impeller setting.3.Extended mechanical seal and bearing life through robust shaft and bearing designs that also minimize shaft deflection.4.Fast and accurate impeller setting with the industry's most innovative external impeller adjustment mechanism.GENERAL DESCRIPTION OF THE PUMPThe Recessed Impeller is an open-vane design that has the shroud a

Fast and accurate impeller setting with the industry's most innovative external impeller adjustment mechanism.In-shop reverse vane impeller adjustment with the only pump that takes full advantage of the back pull-out design.BEARING INSTALLATION FOR POWER END ASSEMBLY (CONT'D)Both bearings have a slight interference fit which requires that they be pressed on the shaft with an arbor or hydraulic press. A chart giving bearing fits is shown in Figure 35. Even force should be applied to the inner race only. Never press on the outer race, as the force will damage the balls and races.

Reliable OperationHigh Efficiency Wide Hydraulic CoverageMechanical sealsDifferent mechanical seals available.