Difference Between ANSI & Api Pumps-manufacture,factory,supplier from China

1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.

Mark III is diagnosed global as the surest name in ANSI chemical process pumps.

All pumps in have been standardized, using common modules and components, for maximum interchangeability and easy installation and maintenanceA double volute casing in larger  pumps reduces radial forces and shaft deflection.The self-venting, top centerline casing prevents air lock in the top of the casing. The sideplate is adjusted externally to maintain a constant impeller clearance and continuous high efficiency.Impeller mounting provides strong, reliable power transmission. It is self-locking and reverse rotation safe. Facilitates the installation and removal of the impeller.

Product DescriptionProven PerformanceUsers in chemical, petrochemical, pulp & paper, primary metals, food & beverage and general industries know they can make no better choice than the best -  Model 3196.Power Ends are the result of over 160 years of design experience, customer interaction, and continuous improvement.  Customers get extended MTBF (Mean Time Between Failure) and lower LCC (Life Cycle Cost)….guaranteed!

Between bearings, single stage, axially split, double entrySuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfacesOverall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.                            6500 l/s                        103000 USGPM  Head max.

The 3196 ansi series is to be had in a huge range of sizes and capacities to match clearly any method-fluid software.Utility: Chemical processingGeneral industriesMiningWater sourcesEnergy technologyPrimary metalsPulp and paperOil and gasolineCapacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)Available Size:6''-15''Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuA

Mark III is recognized international as the most suitable name in ANSI chemical method pumps.

Mark III is identified worldwide because the most advantageous name in ansi chemical procedure pumps.

ImpellerDesigned for lengthy-time period, maintainable overall performance and minimum hydraulic hundreds forMost reliability.Casing• Top centerline discharge for air handling, self-venting.• Class a hundred and fifty pumps have class 300 wall thickness as trendy.• Returned pull-out layout.• Indispensable toes.Seal chamberDesigned for favorable seal environment —right warmness dissipation and lubrication of seal faces.The design ought to also be able to manage hard offerings: beverages containing solids, air or vapors.Energy endDesigned for optimum bearing lifestyles, powerful oil cooling, and

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing functions. They're available in a wide range of configurations, which includes routinely sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller.

Non-clogging method pumps are the right answers whilst the liquid contains huge or long particles.NPP/NPT Hydraulic Design Non-clogging design passes big particles and long fibers, e.g.

Every day in over 500,000 installations, 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Our Pump Replacement Parts are reliable, cost effective replacement parts that are interchangeable with many well known pump brands.We manufacture a range of replacement parts including shafts, casings, impellers, stuffing box covers, sleeves, labyrinth seals, repellers, backplates, followers and many more.Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing features.

High performance process pumps for demanding applicationsAPP/T end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.Main benefits：Long and trusted experience in all industrial segmentsExcellent performanceExceeds standard requirements of international ISO 5199 and ISO 2858 standardsSuitable for the most demanding industrial applicationsUnique, patented and superior design features minimize life cycle costsQuick and easy installation, safe operation, easy maintenance and serviceMa

Conforming to ASME (ANSI) B73.1, Mark 3 pumps include many proven reliability- and overall performance-enhancing features. They're to be had in a huge range of configurations, which include mechanically sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller. It presents flexibility and breadth of pumping solutions in limitless applications.GENERAL DESCRIPTION OF PUMPThe Mark III chemical process pump is a horizontal, end suction, single stage, centerline discharge, centrifugal pump.

The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep  the area between the impeller and the  casing cover clean, and reduce the  axial load on the bearings.

Chemical Process PumpsDesigned for Total Range ofIndustry ServicesI Capacities to 7000 GPM (1364 m 3 /h)I Heads to 730 feet (223 m)I Temperatures to 700°F (371° C)I Pressures to 375 PSIG (2586 kPa)Product Description:The 3196 ANSI series is to be had in a huge variety of sizes, capacities and materials to match virtually any system-fluid utility.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability.CASING• Top centerline discharge for air handling, self-venting.• Class 150 pumps have Class 300 wall thickness as standard.• Back pull-out desi

ZPP Designation & Description:Between bearings, single stage, axially split, double entrySulzer designation yy-zzz ZPPSuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfaces.ZPP Double Suction PumpsPerformance RangeZPP Pumps offers good coverage with many pump sizes for low and high head applications with high efficiencies.

Conforming to ASME(ANSI) B73.1, the Mark 3 chemical process pump provides outstanding hydraulic performanceand many proven reliability- and performance-enhancing features. And it is recognized international as the most suitable name in ANSI chemical method pumps.1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)3.Available Size:6''-16''

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

The 3196 ANSI collection is to be had in a wide variety of sizes, capacities and substances to match absolutely any technique-fluid application.RECEIVING THE PUMPInspect the pump as soon as it is received. Carefully check that everything is in good order. Make notes of damaged or missing items on the receipt and freight bill. File any claims with the transportation company as soon as possible.STORAGE REQUIREMENTSShort Term: (Less than 6 months) normal packaging procedure is designed to protect the pump during shipping.

Decrease overall cost of possession from opposite vane impeller, which eases protection and presents renewable, high-efficiency performance over the pumps' life.Increased reliability and mechanical seal existence because of the correct seal environment created through the sealsentry seal chamber.Ease of preservation as a result of most appropriate, predictable seal chamber pressures which are re-installed after each impeller putting.START-UP CONSIDERATIONSENSURING PROPER NPSHANet Positive Suction Head – Available (NPSHA) is the measure of the energy in a liquid above the vapor pressure.

When the 3196 ANSI Pump was first introduced in 1961, it immediately became the standard in the industry.  Today, the number of installations attest to its remarkable performance.  Users in chemical, petrochemical, pulp & paper, primary metals, food & beverage and general industries know they can make no better choice than the best.1. Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375