Fully open impeller is the best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal,
The Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiencyThe
Chemical Process PumpsDesigned for Total Range ofIndustry ServicesI Capacities to 7000 GPM (1364 m 3 /h)I Heads to 730 feet (223 m)I Temperatures to 700°F (371° C)I Pressures to 375 PSIG (2586 kPa)Product Description:The 3196 ANSI series is to be had in a huge variety of sizes, capacities and
Reliable OperationHigh Efficiency Wide Hydraulic CoverageMechanical sealsDifferent mechanical seals available. Seals fit into the same chamber as packings providing easier change-over to another type of sealing.Double-ended shaft design ensures drive flexibility and better spare rotor
Decrease overall cost of possession from opposite vane impeller, which eases protection and presents renewable, high-efficiency performance over the pumps' life.Increased reliability and mechanical seal existence because of the correct seal environment created through the sealsentry seal chamber.
Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed
1.Our non-blocking pump used for blocking or abrasion event that regular slurry pump now not available.2.Performance(max parameter)Heads 90mAbility 550l/s Temperature one hundred eighty℃
Zpp Pump's core is flow control and applicators. We specialize in pumping solutions, services for rotating equipment, and separation, mixing and application technology.Mechanical sealsDifferent mechanical seals available.Seals fit into the same chamber as packings providing easier change-over to
TYPICAL SPECIFICATIONSDesign: Shall be of a horizontal, end suction, single stage, centerline discharge, “back pull-out” construction, meeting the design criteria of the ASME B73.1-2001 standard.General: All wetted parts shall be permanently marked with the material of construction. Cast parts
Fully open impeller is the excellent design for the chemical manner industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers conveniently. Permits for simple recuperation of clearances while wear takes area. Again pump-out vanes lessen stress at the shaft
русский
español
عربى
português
